Kia Sedan Forte (BD, 2019–2020) IVT Slipping / No Acceleration

What this problem usually means

On 2019-2020 Forte 2.0 cars the Intelligent Variable Transmission (Kia's CVT) can slip so revs climb with little acceleration, sometimes with a check-engine light. Kia campaign SC199 (later TRA102) covers this pattern: dealers update the TCM logic first and replace the IVT if the slipping and codes such as P0730 or P0741 return.

Likely causes

  1. Worn or slipping IVT belt/chain and pulley set
  2. Outdated transmission control module (TCM) logic covered by campaign SC199
  3. Low or degraded IVT fluid (SP-CVT1 only) → Shop the ivt fluid at Amazon
  4. Faulty IVT oil pressure sensor

How to fix it — step by step

  1. Check your VIN for campaign SC199/TRA102 first - the software update and, if needed, IVT replacement under the campaign are handled by a Kia dealer
  2. Note when it slips: from a stop, at highway speed, or only when hot, and whether revs flare without the car speeding up
  3. Scan the transmission control module, not just the engine - look for P0730, P0741 or P160300 → Shop the transmission control module at Amazon
  4. Do not keep driving on a slipping IVT; continued slipping overheats the unit and turns a software fix into a replacement
  5. If codes return after the update and relearn, the IVT itself needs replacement

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Kia Sedan Forte (BD, 2019–2020) problems

See all Kia Forte (BD, 2019–2020) codes & guides →