Jeep SUV Wrangler Brake pedal pulsates when braking

What this problem usually means

A pulsing brake pedal and a shake through the steering wheel under braking on a Wrangler usually means the front brake rotors are warped or have uneven thickness variation. RepairPal lists brake pulsations from warped front rotors as a reported Wrangler problem across 21 model years, at an average of about 64,000 miles. It is a braking-distance and control issue, not just an annoyance, so it should not be put off.

Likely causes

  1. Warped front brake rotors from heat and heavy use → Shop the front brake rotors at Amazon
  2. Uneven rotor thickness variation (disc thickness variation) built up over time
  3. Uneven lug nut torque distorting the rotor on the hub
  4. Worn brake pads run too long and scoring the rotor surface

How to fix it — step by step

  1. Confirm the pattern: pulsation that appears only while braking, and gets stronger from higher speed, points at the rotors rather than tires or alignment
  2. Inspect the front pads and rotors for scoring, blue heat spots and remaining pad life; measure rotor thickness and runout if you have the tools
  3. If the rotors are thick enough, RepairPal notes an on-car brake lathe is the best way to true them; rotors below minimum thickness must be replaced, in axle pairs with new pads → Shop the brake pads at Amazon
  4. Clean the hub face before fitting rotors and torque the lug nuts evenly in a star pattern to the specified torque so the new rotors are not distorted
  5. Bed the new pads in with a series of moderate stops and re-check for pulsation on a test drive

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Jeep manual is on Jeep's support site — you'll need your model number.

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Jeep SUV Wrangler problems

See all Jeep Wrangler codes & guides →