Jeep SUV Grand Cherokee Air suspension failure

What this problem usually means

The Grand Cherokee's air suspension is a common weak point that often fails after 80,000 to 120,000 kilometres, particularly on models from 2013 onwards where it was fitted as standard. Failure shows up as uneven vehicle height, warning messages and poor driving characteristics, with the air bellows and compressors particularly susceptible to wear and the rear air bellows often failing first.

Likely causes

  1. worn or leaking air bellows, with the rear bellows often failing first
  2. worn air suspension compressor → Shop the air suspension compressor at Amazon
  3. leaks and seal wear in the air suspension system as it ages

How to fix it — step by step

  1. Park on level ground and measure or photograph the ride height at each corner, noting any corner that sags overnight
  2. Scan for air suspension fault codes and have the system pressure-tested for leaks before replacing parts
  3. Inspect the air bellows, especially the rears, and listen for the compressor running excessively → Shop the air bellows at Amazon
  4. Replace the leaking bellows or the failed compressor the testing identifies
  5. Confirm the vehicle levels itself correctly at all ride-height settings after the repair

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Jeep manual is on Jeep's support site — you'll need your model number.

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Jeep SUV Grand Cherokee problems

See all Jeep Grand Cherokee codes & guides →