Jandy Pool heater FAULT - HIGH FLUE TEMPERATURE Error Code
What the FAULT - HIGH FLUE TEMPERATURE code means
On Jandy JXi gas pool heaters, FAULT - HIGH FLUE TEMPERATURE means the flue temperature limit has faulted because exhaust gas is running too hot, and the heater has shut down.
Likely causes
- blocked or restricted vent or flue
- fan not running or running slow
- sooted heat exchanger
- faulty flue temperature sensor
How to fix it — step by step
- Turn the heater off and do not keep resetting it
- From outside the cabinet, check the vent for bird, insect or rodent blockage
- Do not open the heater cabinet or bypass the limit
- Call a qualified pool heater technician to inspect the vent, fan and flue sensor
Parts that commonly fix the FAULT - HIGH FLUE TEMPERATURE code
- flue temperature sensor - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.