iRobot Robot vacuum Roomba j Series Error 7
What this problem usually means
Side wheels cannot turn; robot was started on an uneven surface or got stuck on an obstacle (spoken: 'Wheel problem. See the App for help')
Likely causes
- Side wheels cannot turn
- Started on uneven surface or stuck on an obstacle
How to fix it — step by step
- Check both side wheels for debris
- Place the robot on a flat surface
- Press the button to restart
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official iRobot manual is on iRobot's support site — you'll need your model number.
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.