iRobot Robot vacuum Roomba i Series Error 99
What this problem usually means
Robot was not able to orient itself based on known landmarks, could not complete cleaning, and therefore canceled the cleaning job (indicated as 'incomplete' in the mission report)
Likely causes
- Robot could not orient itself from known landmarks
- Cleaning job canceled / incomplete
How to fix it — step by step
- Ensure adequate light for navigation
- Wipe the camera window clear of dust or debris
- Ensure no changes to the environment during the job; restart the job
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the fault is internal - there is no documented owner fix beyond the steps above. If you're not comfortable opening the machine up, a repair shop is the next step.
Parts that commonly fix it
This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official iRobot manual is on iRobot's support site — you'll need your model number.
Find your model number on the underside label or in the app. It's the key to the right manual pages and the right parts.