iRobot Robot vacuum Error 34

What this problem usually means

An internal communications error inside the robot. iRobot's documented fix is to reboot the robot.

Likely causes

  1. Temporary internal communications fault
  2. Internal board communication glitch that clears on reboot

How to fix it — step by step

  1. Reboot the robot
  2. Press CLEAN to restart the job
  3. Run a short test job to confirm the error has cleared
  4. Contact iRobot Customer Care if it repeats after rebooting

Parts that commonly fix it

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related iRobot robot vacuum problems

See all iRobot robot vacuum codes & guides →