Hyundai SUV Tucson Engine stalls while driving

What this problem usually means

Engine failure is a significant 2012 and 2013 Tucson problem: the engine can shut down suddenly with no apparent reason, sometimes after loud knocking sounds and the check engine light coming on. Many affected engines needed replacement, and mechanics traced the issue to the rod bearings; Hyundai TSB 21-EM-004H sets out a connecting rod bearing clearance test procedure.

Likely causes

  1. worn connecting rod bearings → Shop the connecting rod bearings at Amazon
  2. internal engine damage leading to seizure

How to fix it — step by step

  1. If the engine stalls or knocks loudly, pull over safely, switch off and do not restart it
  2. Check the oil level once the engine has stopped and it is safe to do so
  3. Arrange a tow rather than driving on a knocking engine
  4. Have a shop perform the bearing clearance test from Hyundai's service procedure and assess whether the engine can be repaired or must be replaced

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Hyundai SUV Tucson problems

See all Hyundai Tucson codes & guides →