Hyundai SUV Tucson (LM, 2013–2013) No Sound From Speakers

What this problem usually means

RepairPal documents Tucson gasoline models with navigation units that suddenly lose all speaker sound — radio, CD, phone and navigation prompts all go silent while the screen and other functions keep working (60 owner reports). It is an amplifier/head-unit logic fault rather than blown speakers, which is why a hard reset that fully powers the system down restores sound on many cars.

Likely causes

  1. Navigation head unit/amplifier logic fault requiring a hard reset
  2. Failed external amplifier on navigation-equipped cars
  3. Blown audio fuse or poor ground at the head unit
  4. Multiple speaker failure (rare, and usually not all at once)

How to fix it — step by step

  1. Note whether everything else on the screen works; working display with zero audio from every source points to the amp/head unit, not the speakers → Shop the head unit at Amazon
  2. Check the audio/amp fuses before pricing a head unit → Shop the audio fuse at Amazon
  3. Perform the documented hard reset: disconnect the negative battery terminal, wait about 15 minutes, reconnect, and retest
  4. If resets stop working, have the amplifier and head unit diagnosed; replacement units are the usual fix → Shop the amplifier at Amazon

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Hyundai SUV Tucson (LM, 2013–2013) problems

See all Hyundai Tucson (LM, 2013–2013) codes & guides →