Hyundai SUV Tucson (LM, 2010–2013) ABS Module Fire Risk

What this problem usually means

Tucsons from 2010-2013 are named in NHTSA recall 23V-651 (Hyundai campaign 251), and the wider HECU fire campaigns reach into later Tucson years: the ABS module can leak brake fluid internally, short its circuit board and start an engine-compartment fire while the vehicle is parked. Owners of covered cars are told to park outside and away from structures until dealers fit the free remedy — a lower-amperage ABS fuse.

Likely causes

  1. Internal brake fluid leak in the ABS/HECU module
  2. Electrical short and overcurrent on the module circuit board
  3. Age-related seal failure in the Mando-supplied module
  4. Repeated ABS fuse failure as an early symptom

How to fix it — step by step

  1. Run your VIN at nhtsa.gov/recalls; if the ABS recall is open, park outside and away from buildings until the repair is done
  2. Book the free dealer fuse remedy promptly — do not wait for symptoms
  3. Treat smoke, a burning smell or new ABS warning lights as an emergency: switch off, get out and call for help
  4. Do not fit a larger fuse or keep replacing blown ABS fuses; that defeats the protection the recall adds → Shop the abs fuse at Amazon

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Hyundai SUV Tucson (LM, 2010–2013) problems

See all Hyundai Tucson (LM, 2010–2013) codes & guides →