Hyundai SUV Santa Fe (DM, 2013–2018) Oil Consumption

What this problem usually means

Santa Fe Sport models with the Theta II 2.4L and 2.0T GDI engines (2013-2018, worst 2013-2015) commonly burn a quart of oil every 1,000 miles or less with nothing on the driveway, as direct-injection carbon fouls the rings and lets oil into the combustion chamber. Consumption is usually the first stage of the Santa Fe Theta II story: ignored, it starves the rod bearings and ends in the engine failure these SUVs are recalled for.

Likely causes

  1. Carbon-fouled piston/oil control rings on Theta II GDI engines → Shop the piston rings at Amazon
  2. Piston ring wear letting oil past into the chamber
  3. Valve stem seal wear at higher mileage
  4. PCV system faults increasing oil consumption

How to fix it — step by step

  1. Log the real rate: fill to the mark, then record oil added per 1,000 miles — Santa Fe owners often discover consumption only when the dipstick is dry
  2. Rule out external leaks first, since these engines can do both
  3. Replace the PCV valve and re-measure before internal work is quoted → Shop the pcv valve at Amazon
  4. Ask a dealer to document consumption and check recall/settlement engine coverage for your VIN (Campaign 953/KSDS status matters)
  5. Keep the oil full and change it early while it burns; low oil is what converts this from a nuisance into an engine

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Hyundai SUV Santa Fe (DM, 2013–2018) problems

See all Hyundai Santa Fe (DM, 2013–2018) codes & guides →