Hyundai SUV Palisade (LX2, 2024–2024) Engine Stalls

What this problem usually means

Early-build 2024 Palisades are under NHTSA recall 24V106 for engine valve springs that can break while driving, causing a sudden loss of drive power and possibly holing the engine block — a complete engine-failure outcome, not a sensor stall. A 2024 that stalls, loses power or develops a sudden severe misfire should be treated as a recall case first and checked by VIN before anyone sells you ignition or fuel parts.

Likely causes

  1. Broken engine valve spring (2024 recall 24V106 defect)
  2. Oil consumption running the 3.8L sump dry on 2020-2021 cars
  3. Idle stop-and-go oil pump controller overheating fault (separate Palisade recall family)
  4. Fuel delivery or crank sensor fault (rule out after the recalls)

How to fix it — step by step

  1. Check your VIN at nhtsa.gov/recalls immediately if you own a 2024; confirm recall 24V106 is closed before anything else
  2. If the engine lost power with new mechanical noise, do not restart and drive it — a broken spring can damage the block → Shop the engine block at Amazon
  3. Have stored codes read, but let the dealer perform the recall inspection rather than authorizing parts first
  4. Keep all recall and inspection paperwork; engine damage from this defect is a coverage question, not a normal repair bill

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Hyundai SUV Palisade (LX2, 2024–2024) problems

See all Hyundai Palisade (LX2, 2024–2024) codes & guides →