Hyundai SUV Palisade (LX2, 2020–2023) Wiper Motor Failure

What this problem usually means

Palisade wipers have been recalled twice for motors that stop working: NHTSA 22V627 covers 2020-2021 cars whose wiper motor can become inoperative, and 23V180 covers 2021-2023 cars whose motor can work intermittently or fail when snow or ice builds up on the windshield. A Palisade whose wipers quit in rain or snow is therefore a VIN-check-first problem, because the motor replacement is a free recall remedy on covered cars.

Likely causes

  1. Wiper motor failure covered by recalls 22V627/23V180
  2. Snow or ice load stalling a marginal motor (the 23V180 pattern)
  3. Blown wiper fuse or failed wiper switch/relay
  4. Seized wiper linkage increasing motor load

How to fix it — step by step

  1. Check your VIN for both wiper campaigns (22V627 and 23V180) before paying for a motor
  2. Clear snow and ice fully from the windshield and cowl before using the wipers, especially on 2021-2023 cars
  3. Check the wiper fuse and test whether the motor runs with the linkage disconnected if the recall does not apply → Shop the wiper linkage at Amazon
  4. Book the free dealer motor replacement if a recall is open; do not rely on a car whose wipers can quit in a storm

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Hyundai SUV Palisade (LX2, 2020–2023) problems

See all Hyundai Palisade (LX2, 2020–2023) codes & guides →