Hyundai SUV Palisade (LX2, 2020–2021) Oil Consumption

What this problem usually means

The Palisade's 3.8L Lambda II V6 in 2020-2021 models is documented burning four to five quarts of oil every 3,000 miles in owner reports — roughly double a normal rate — with at least one 2020 Limited needing a full engine replacement around 85,000 miles. NHTSA complaint analysis likewise puts oil consumption, fuel-in-oil and overheating complaints far above similar SUVs, and Hyundai has issued no recall for it, so cases are handled as individual warranty claims built on a documented consumption test.

Likely causes

  1. Piston ring sealing loss on the 3.8L V6
  2. Valve stem or guide seal wear
  3. PCV system faults drawing oil into the intake
  4. External leak mistaken for consumption (confirm there is no drip)

How to fix it — step by step

  1. Check the dipstick every 1,000 miles; owners report the low-oil warning may not appear until the sump is nearly dry
  2. Start a written consumption log with dates, mileage and quarts added — Hyundai's warranty process requires a documented consumption test
  3. Rule out external leaks around the valve covers, pan and rear of the engine
  4. Ask the dealer to run the formal oil consumption test and keep every record; ring-level consumption is internal engine work

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Hyundai SUV Palisade (LX2, 2020–2021) problems

See all Hyundai Palisade (LX2, 2020–2021) codes & guides →