Hyundai Sedan Sonata Brake lights keep burning out
What this problem usually means
On the 2013 Sonata, brake lights burn out at an alarming rate, and many owners had to replace the wiring harness more often than usual because the lights kept failing.
Likely causes
- damaged tail light wiring harness
- repeated bulb failure in the tail light circuit
How to fix it — step by step
- Check both brake lights with a helper pressing the pedal, and replace a failed bulb with the correct type → Shop the brake light bulb at Amazon
- If a new bulb fails again quickly, stop replacing bulbs and have the circuit tested
- Inspect the tail light sockets for heat damage or corrosion if they are safely accessible
- Have a shop repair or replace the tail light wiring harness and any damaged sockets → Shop the wiring harness at Amazon
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the brake light bulb.
Shop the brake light bulb at Amazon
Also tied to this fault: wiring harness - Shop at Amazon; tail light assembly - Shop at Amazon
Parts that commonly fix it
- brake light bulb - Shop at Amazon
- wiring harness - Shop at Amazon
- tail light assembly - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.