Hyundai Sedan Elantra (MD/AD, 2015–2018) White Paint Peeling

What this problem usually means

White Elantras are part of Hyundai's White Paint Warranty Extension Z05: certain 2015-2018 cars in factory white can bubble and peel off metal panels — hood, roof, fenders, doors and trunk — because the paint film loses adhesion to the primer. Hyundai extended coverage for this condition from 3 years/36,000 miles to 10 years with unlimited miles, so check eligibility before paying a body shop.

Likely causes

  1. Factory paint/primer adhesion failure on covered white colors
  2. UV and heat accelerating delamination on horizontal panels (hood, roof, trunk)
  3. Prior collision repaint, which the extension does not cover
  4. Stone chips or scratches (external damage, not the covered defect)

How to fix it — step by step

  1. Photograph the peeling panels and check your VIN on Hyundai's Z05 validation page before getting repaint quotes → Shop the paint at Amazon
  2. Look for the covered pattern: sheets or bubbles lifting off metal panels, rather than small chips at the leading edge
  3. Book a dealer inspection promptly if you are near the 10-year limit from the car's first-use date
  4. Do not sand, wrap or repaint the panels before the dealer documents them, as that can complicate a coverage claim

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Hyundai Sedan Elantra (MD/AD, 2015–2018) problems

See all Hyundai Elantra (MD/AD, 2015–2018) codes & guides →