Hyundai Sedan Elantra (MD, 2011–2015) ABS Module Fire Risk

What this problem usually means

Certain 2011-2015 Elantras are under NHTSA recall 23V-651 (Hyundai campaign 251): the ABS module can leak brake fluid internally onto its circuit board, short and start an engine-compartment fire while parked or driving. Hyundai's instruction is explicit — park outside and away from structures until the free remedy, a replacement ABS fuse, is fitted.

Likely causes

  1. Brake fluid leaking internally past ABS module seals onto the circuit board → Shop the abs module at Amazon
  2. Electrical short and overcurrent inside the ABS/HECU module
  3. Corrosion or moisture damage inside an ageing module
  4. Blown ABS fuse as a symptom, not the root cause

How to fix it — step by step

  1. Check your VIN at nhtsa.gov/recalls today; if recall 251 is open, park outside and away from buildings until it is done
  2. Book the free dealer remedy (ABS fuse replacement) as soon as possible → Shop the abs fuse at Amazon
  3. Treat a burning smell, smoke from under the hood, or ABS/check-engine warning lights as an emergency: switch off, move away and call for help
  4. Do not keep replacing a blown ABS fuse yourself; repeated blowing means the module is shorting and needs the recall path

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Hyundai Sedan Elantra (MD, 2011–2015) problems

See all Hyundai Elantra (MD, 2011–2015) codes & guides →