Honeywell Air purifier HPA5100 / HPA5150 / HPA5200 / HPA5220 / HPA5250 / HPA5300 / HPA5350 Noise and Reduced Air Output
What this problem usually means
Frequently Asked Questions entry: the air purifier is starting to make noise and the air output is less.
Likely causes
- The filters may be dirty - high amounts of particles can block the pores in the filter and stop air from moving through it
How to fix it — step by step
- Replace the filters - HEPA Filters should be replaced every year and the Pre-Filter and Enhanced Odor and VOC Filters should be replaced every 3 months (guidelines only; check filters periodically as home conditions vary) → Shop the hepa filter hrf-r1 / hrf-r2 / hrf-r3 at Amazon
- Use Certified Genuine Honeywell Filters to help ensure the unit performs properly
- Reset the Filter Check indicator after replacing the filters - for the Pre-Filter / VOC filter, with the unit off press Filter Reset 2 times within one second; for HEPA, with the unit off hold Filter Reset for two seconds
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the HEPA Filter HRF-R1 / HRF-R2 / HRF-R3.
Shop the HEPA Filter HRF-R1 / HRF-R2 / HRF-R3 at Amazon
Also tied to this fault: Pre-Filter HRF-AP1 / HRF-APP1 - Shop at Amazon
Parts that commonly fix it
- HEPA Filter HRF-R1 / HRF-R2 / HRF-R3 - Shop at Amazon
- Pre-Filter HRF-AP1 / HRF-APP1 - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.