Honda Wagon Odyssey Broken front engine mount
What this problem usually means
Owners of 1999-2005 Odysseys reported clunking noises and excessive vehicle vibration caused by a broken front engine mount. The failed mount usually results in rough idling and hard shifting as the engine moves more than it should.
Likely causes
- broken front engine mount
How to fix it — step by step
- Note whether the clunk and vibration are worst at idle or when the transmission shifts
- Have a shop inspect the front engine mount for cracks or separation → Shop the engine mount at Amazon
- Replace the broken engine mount and check the remaining mounts for wear
- Retest for vibration and hard shifting after the replacement
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the engine mount.
Parts that commonly fix it
- engine mount - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Honda manual is on Honda's support site — you'll need your model number.
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.