Honda SUV Pilot Warped brake rotors cause vibration

What this problem usually means

Many 2003-2017 Pilot owners have reported warped brake rotors, which cause excessive vibration while braking. The problem typically shows up at high speeds because of the heat generated through friction, and faulty brake pad shims on some 2003 and 2004 models can also cause a clunking noise while braking.

Likely causes

  1. warped brake rotors from heat
  2. faulty brake pad shims

How to fix it — step by step

  1. Note whether the vibration happens mainly when braking from higher speeds
  2. Have a shop measure rotor runout and thickness and inspect the pads and shims
  3. Replace warped rotors and worn pads rather than continuing to brake on a vibrating pedal → Shop the brake rotors at Amazon → Shop the brake pads at Amazon

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Honda manual is on Honda's support site — you'll need your model number.

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Honda SUV Pilot problems

See all Honda Pilot codes & guides →