Honda SUV HR-V Push-to-start button fails to start engine
What this problem usually means
Some HR-Vs, notably 2016 models, struggle to start via the push button, sometimes taking multiple tries to get the engine going. In 2020 Honda issued a service bulletin extending the warranty on the keyless start system for 2016-2018 models, and its repair procedure calls for replacing the Engine Stop/Start Switch.
Likely causes
- faulty engine stop/start switch
- keyless start system fault
How to fix it — step by step
- Note how many presses the button needs and whether the problem is getting worse
- Try the spare key fob to rule out a fob problem first
- Check by VIN whether the keyless start warranty extension covers the vehicle
- Have a shop replace the engine stop/start switch following Honda's repair procedure → Shop the engine stop/start switch at Amazon
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the engine stop/start switch.
Parts that commonly fix it
- engine stop/start switch - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Honda manual is on Honda's support site — you'll need your model number.
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.