Honda SUV CR-V (3rd generation, 2007–2008) Door locks not working

What this problem usually means

The 2007-2008 CR-V is notorious for faulty door lock actuators: locks that cycle on their own, fail to lock or unlock with the fob, or drain the battery by repeatedly trying. It is an inexpensive-part, annoying-frequency problem on those years.

Likely causes

  1. Failed door lock actuator in the affected door
  2. Weak key fob battery mimicking an actuator fault (check first)
  3. Wiring damage in the door jamb harness
  4. Blown lock fuse if all doors fail at once

How to fix it — step by step

  1. Replace the key fob battery first if all functions are weak → Shop the key fob battery at Amazon
  2. Identify whether one door or all doors misbehave; one door points to its actuator, all doors points to power, fuse or the control unit
  3. Listen at each door while locking; a grinding or lazy sound identifies the dying actuator → Shop the door lock actuator at Amazon
  4. Replace the actuator in the affected door; it is inside the door, so trim removal is required but no special tools

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Honda manual is on Honda's support site — you'll need your model number.

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Honda SUV CR-V (3rd generation, 2007–2008) problems

See all Honda CR-V (3rd generation, 2007–2008) codes & guides →