Honda Sedan Civic (8th generation, 2006–2009) Overheating Error Code

What the Overheating code means

On 2006-2009 Civics with the 1.8L engine, the engine block itself can crack and leak coolant, a documented defect that presents as slow coolant loss with no puddle under the car. An overheating eighth-generation Civic that keeps losing coolant should be checked for the cracked block before a head gasket is assumed.

Likely causes

  1. Cracked engine block on 2006-2009 1.8L cars
  2. Water pump or thermostat failure → Shop the water pump at Amazon
  3. Radiator or hose leak
  4. Failed radiator fan

How to fix it — step by step

  1. Stop driving an overheating car; a cracked block or not, heat destroys engines quickly → Shop the engine block (short block) at Amazon
  2. Check the coolant level cold and look for leaks around the block, pump and hoses
  3. Have the cooling system pressure-tested; the block crack typically shows as an external seep on the block casting
  4. A confirmed cracked block means engine replacement, a major decision on a car of this age; get the diagnosis in writing before authorizing

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix the Overheating code

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Honda manual is on Honda's support site — you'll need your model number.

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Honda Sedan Civic (8th generation, 2006–2009) error codes

See all Honda Civic (8th generation, 2006–2009) codes & guides →