Honda Sedan Civic (10th generation, 2016–2021) Vibrates when braking

What this problem usually means

Warped front brake rotors are a documented wear item on the Civic (noted for the 1.8L cars in particular), causing the steering wheel to shake under braking. It is a routine brake job, but the rotors should be checked for a sticking caliper so the new set does not warp the same way.

Likely causes

  1. Warped front rotors
  2. Sticking caliper overheating one rotor
  3. Uneven lug nut torque
  4. Worn pads

How to fix it — step by step

  1. Confirm the shake is braking-only; a constant highway shake is wheel balance instead
  2. Inspect pads and rotors on both front wheels and compare wear side to side
  3. Replace pads and rotors as a pair and service the caliper pins
  4. Torque the wheels evenly in a star pattern to specification

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Honda manual is on Honda's support site — you'll need your model number.

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Honda Sedan Civic (10th generation, 2016–2021) problems

See all Honda Civic (10th generation, 2016–2021) codes & guides →