Honda Sedan Accord Rear brake pads wear out quickly

What this problem usually means

2008-2010 Accords are notorious for premature rear brake pad wear, with owners reporting rear pads worn out in roughly 15,000-20,000 miles. MotorRank notes it was the subject of a Honda class-action settlement covering 2008-2010 Accords (and 2009-2010 Acura TSX).

Likely causes

  1. Undersized/high-wear rear brake pads → Shop the rear brake pads at Amazon
  2. Rear brake bias and pad compound on this generation
  3. Sticking rear caliper slides accelerating wear

How to fix it — step by step

  1. Listen for rear brake squeal or grinding and inspect rear pad thickness
  2. Compare rear pad wear with the fronts - rears wearing first is the pattern here
  3. Have caliper slides cleaned and lubricated at each pad change
  4. Replace rear pads (and rotors if scored) and monitor wear at every tire rotation

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Honda manual is on Honda's support site — you'll need your model number.

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Honda Sedan Accord problems

See all Honda Accord codes & guides →