Honda Sedan Accord (All models) Vibrates when braking
What this problem usually means
Warped front brake rotors are a frequent Accord complaint, producing a steering wheel shake and pedal pulsation under braking. Owner survey data also puts brake calipers at the top of the most-replaced Accord parts list, and a sticking caliper will warp a new rotor in short order if it is not caught.
Likely causes
- Warped front rotors from heat and uneven lug torque
- Sticking brake caliper overheating one side → Shop the brake caliper at Amazon
- Pads worn unevenly or down to the wear indicators
- Rear brake wear, notably fast rear pad wear reported on 2008-2009 cars
How to fix it — step by step
- Confirm the vibration occurs only under braking; constant vibration is a tire or balance problem
- Measure pad thickness on both sides of each front wheel; uneven wear points to a sticking caliper or slide pins
- Replace rotors and pads together per axle and service the caliper slide pins
- Torque lug nuts evenly in a star pattern to spec to avoid re-warping the new rotors
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the brake rotors.
Shop the brake rotors at Amazon
Also tied to this fault: brake pads - Shop at Amazon; brake caliper - Shop at Amazon
Parts that commonly fix it
- brake rotors - Shop at Amazon
- brake pads - Shop at Amazon
- brake caliper - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Honda manual is on Honda's support site — you'll need your model number.
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.