Honda Sedan Accord (8th generation, 2008–2012) Burning oil

What this problem usually means

V6 Accords from 2008-2012 with Variable Cylinder Management (VCM) are known for oil fouling and consumption: the system can foul plugs and increase oil use on the deactivated cylinders. Honda extended warranty coverage for piston ring repairs on many of these cars, and service records showing a ring job or a VCM disabler are a good sign on a used one.

Likely causes

  1. VCM-related piston ring oil fouling on 2008-2012 V6 models
  2. Four-cylinder oil consumption on some 2008-2010 cars
  3. Stuck PCV valve
  4. Valve stem seal wear at high mileage

How to fix it — step by step

  1. Log the consumption rate with dipstick checks every 500 miles
  2. Inspect the spark plugs; oil-fouled plugs on the VCM cylinders support the VCM/ring diagnosis → Shop the spark plugs at Amazon
  3. Replace the PCV valve and re-measure before assuming rings → Shop the pcv valve at Amazon
  4. Ask a Honda dealer whether the car was repaired under the VCM oil consumption warranty extension; internal ring work is major engine work

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Honda manual is on Honda's support site — you'll need your model number.

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Honda Sedan Accord (8th generation, 2008–2012) problems

See all Honda Accord (8th generation, 2008–2012) codes & guides →