Hisense TV VIDAA Wi-Fi Won't Connect

What this problem usually means

The TV cannot connect to the network or apps, the wireless connection fails outright, or the signal is too weak to hold. Hisense's manual provides a built-in Network Test (Settings > Support > Self Diagnosis > Network Test, which displays 'Connected successfully' when healthy) and attributes failures to the router being off/not online and to weak signal placement.

Likely causes

  1. Wireless modem/router off or not connected to the internet
  2. Wireless signal too weak - router in a corner or far from the TV
  3. Wrong network/password, or an ISP-side problem
  4. Failed internal Wi-Fi module if Ethernet works but no networks are seen → Shop the wi-fi module at RepairClinic

How to fix it — step by step

  1. Run Settings > Support > Self Diagnosis > Network Test and note the result
  2. Make sure the wireless modem/router is on and connected to the internet, and restart it → Shop the router at RepairClinic
  3. Position the router in a central location and avoid putting it in a corner; move it closer to the TV if possible
  4. On Google TV models re-select the network under Settings > Network & Internet > Wi-Fi and re-enter the password; on Roku models use Settings > Network > Check connection / Set up connection
  5. Try a wired Ethernet connection if available - if wired works and wireless does not after these steps, contact your ISP first, then Hisense if the TV sees no networks at all

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.

Related Hisense TV VIDAA problems

See all Hisense VIDAA codes & guides →