Hayward Pool pump Drive overload
What this problem usually means
On Hayward TriStar VS 900 variable-speed pool pumps (Check System message), Drive overload means motor current is too high; the manual says to check the impeller, diffuser, shaft seal and motor for issues or binding, and notes this error can only be reset by cycling power.
Likely causes
- debris binding the impeller
- worn shaft seal or diffuser
- motor binding or failing
How to fix it — step by step
- Turn power off at the breaker - Drive overload is cleared by cycling power, not just Stop/Resume
- With power off, empty the strainer basket and check for visible debris at the impeller inlet
- Restore power once and try to start the pump
- Do not disassemble the wet end unless you are comfortable resealing it
- If overload returns, call a pool/spa technician
Parts that commonly fix it
- impeller - Shop at RepairClinic
- shaft seal - Shop at RepairClinic
- motor drive - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.