GMC SUV Yukon (K2UG, 2015–2020) Lifter ticking noise

What this problem usually means

On Yukons with the 5.3L or 6.2L V8, a ticking or tapping from the top of the engine that rises with rpm, often with a misfire and check engine light, is the classic sign of a failed Active Fuel Management lifter. The deactivation lifters can collapse, and the 2015-2020 generation is the heart of the pattern. If the camshaft lobe under a failed lifter is scored, the repair grows from lifters to lifters plus camshaft.

Likely causes

  1. Collapsed AFM lifter on a deactivation cylinder
  2. Camshaft lobe damage from the failed lifter
  3. Exhaust manifold leak ticking, which must be ruled out first
  4. Low oil level or overdue oil changes aggravating lifter wear

How to fix it — step by step

  1. Note whether the tick comes with a misfire, rough idle or flashing check engine light
  2. Scan for misfire codes, especially on cylinders 1, 4, 6 and 7, the AFM cylinders
  3. Check the oil level and service history before driving further; stop if the light flashes
  4. Rule out an exhaust manifold leak, the cheap fault that sounds like a lifter
  5. A confirmed collapsed lifter means lifter replacement, plus the camshaft if its lobe is damaged; this is internal engine work → Shop the camshaft at Amazon

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related GMC SUV Yukon (K2UG, 2015–2020) problems

See all GMC Yukon (K2UG, 2015–2020) codes & guides →