GMC SUV Acadia (GMT968, 2007–2014) Timing chain rattle at startup

What this problem usually means

On 2007-2012 Acadias with the 3.6L V6 (the pattern runs to 2014), a cold-start rattle plus a check engine light with cam/crank correlation codes P0008 or P0017 usually means the timing chains have stretched. Long oil-change intervals on the early oil life monitor made it worse. GM covered some early vehicles under Special Coverage 11340 (10 years/120,000 miles, now expired) and documented the wear in bulletin 12-06-01-009A.

Likely causes

  1. Stretched timing chains and worn guides on the 3.6L V6 → Shop the timing chain guides at Amazon
  2. Extended oil-change intervals starving the hydraulic chain tensioners
  3. Low oil level from the 3.6L's oil consumption habit
  4. A failed camshaft position sensor mimicking a correlation code, which must be ruled out

How to fix it — step by step

  1. Scan for P0008, P0009, P0016 or P0017; a correlation code plus a cold-start rattle is the classic pair
  2. Check the oil level and change history before anything else; top up with the specified oil
  3. Do not keep driving on a P0008: a badly stretched chain can jump timing and bend valves on this interference engine
  4. Have a shop confirm with cam/crank timing data before quoting the job
  5. The repair is replacement of the chains, guides and tensioners, which on the Acadia means major engine work

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related GMC SUV Acadia (GMT968, 2007–2014) problems

See all GMC Acadia (GMT968, 2007–2014) codes & guides →