GMC SUV Acadia (C1XX, 2017) Excessive oil consumption

What this problem usually means

Acadias with the 3.6L V6 can burn oil steadily with no leak on the driveway: owners of 2017 models have filed NHTSA complaints about oil disappearing between changes, and the first-generation 3.6L is known for the same habit. On this engine low oil is doubly risky, because the timing chain tensioners run on oil pressure. Worn piston rings and valve seals are the usual internal causes once leaks are ruled out.

Likely causes

  1. Worn piston rings letting oil into the combustion chambers → Shop the piston rings at Amazon
  2. Worn valve stem seals → Shop the valve stem seals at Amazon
  3. PCV system drawing oil vapor into the intake
  4. External leaks (valve covers, timing cover) that must be ruled out first

How to fix it — step by step

  1. Start an oil log: record the dipstick level and quarts added against mileage for one full change interval
  2. Inspect the engine and the ground where you park for leaks before concluding the engine burns the oil
  3. Check the spark plugs for oil fouling and watch for blue smoke on deceleration
  4. Shorten your oil-change interval and check the level every fuel stop while the cause is diagnosed; never let a 3.6L run low
  5. If a consumption test confirms ring or seal wear, the repair is internal engine work

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related GMC SUV Acadia (C1XX, 2017) problems

See all GMC Acadia (C1XX, 2017) codes & guides →