Frigidaire Window Air Conditioner Conventional electronic-control models (FFRA/FFRE/FHWW/FHTC) CS Error Code

What the CS code means

Sensor failure on Frigidaire room/window air conditioners: the condenser temperature sensor has failed. Frigidaire's manual lists 'CS' among the sensor fault displays ('HS', 'AS', 'ES', 'CS' or 'OS') and instructs the owner to contact an Authorized Frigidaire Service Center.

Likely causes

  1. Condenser temperature sensor failed (open or short circuit) → Shop the condenser temperature sensor at RepairClinic
  2. Sensor wiring harness loose or damaged
  3. Electronic control board fault

How to fix it — step by step

  1. Turn the unit off and unplug it for a few minutes, then restart it to rule out a temporary glitch
  2. If 'CS' returns, contact an Authorized Frigidaire Service Center - the manual lists no user-serviceable fix for this code
  3. A technician will test the condenser sensor and its harness and replace the sensor or control board as needed

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix the CS code

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Working on a specific model? The official Frigidaire manual is on Frigidaire's support site — you'll need your model number.

Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.

Related Frigidaire Window Air Conditioner Conventional electronic-control models (FFRA/FFRE/FHWW/FHTC) error codes

See all Frigidaire Conventional electronic-control models (FFRA/FFRE/FHWW/FHTC) codes & guides →