Frigidaire Dryer E4A Error Code

What the E4A code means

Program timeout: the drying time has exceeded the maximum time allowed for the selected cycle, usually because clothes are still wet.

Likely causes

  1. Blocked or restricted exhaust vent
  2. Clogged lint screen
  3. Oversized or very wet load
  4. Weak heating circuit

How to fix it — step by step

  1. Clean the lint screen thoroughly
  2. Check the vent behind the dryer is not crushed and clean lint from the full vent run
  3. Run smaller loads and make sure the washer spun the clothes well
  4. If loads still time out with a clear vent, book service to check the heater

Parts that commonly fix the E4A code

This fault usually does not need a replacement part - the fix is in the steps above. If your machine does need a part, start with the link above.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Frigidaire dryer error codes

See all Frigidaire dryer codes & guides →