Frigidaire Dishwasher i10 Error Code

What the i10 code means

A low fill has been detected: the dishwasher did not get enough water to reach the correct level.

Likely causes

  1. Water shutoff valve not fully open
  2. Pinched or kinked water supply line
  3. Clogged inlet valve screen
  4. Failed water inlet valve

How to fix it — step by step

  1. Make sure the dishwasher water shutoff is fully open
  2. Check the supply line under the sink for pinches or kinks
  3. Press Cancel or turn power off at the breaker for 5 minutes and restart
  4. If i10 returns, book service to test the inlet valve

Parts that commonly fix the i10 code

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Related Frigidaire dishwasher error codes

See all Frigidaire dishwasher codes & guides →