Dyson Air purifier TP04 Filter replacement alert

What this problem usually means

The machine alerts you when it is time to change the filters. Dyson recommends replacing the HEPA + Carbon filter roughly every 12 months.

Likely causes

  1. HEPA + Carbon filter has reached the end of its roughly 12-month service life

How to fix it — step by step

  1. Replace the HEPA + Carbon filter with a new one. → Shop the hepa + carbon filter at Amazon
  2. After replacing the filter, press and hold the Night mode button on the remote control.
  3. The display counts down from five, the filter life is reset, and the machine is ready to use.

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.

Related Dyson Air purifier TP04 problems

See all Dyson TP04 codes & guides →