Dyson Air purifier Pure Hot+Cool HP01 Filter replacement indicator

What this problem usually means

The machine displays a filter pattern on the LED display when the filter needs replacing.

Likely causes

  1. Filter has reached the end of its service life

How to fix it — step by step

  1. Unplug the machine.
  2. Press both buttons to lift off the filter assembly and remove the old filter.
  3. Install the new filter until it clicks into place and reassemble the machine.
  4. Press and hold the 'Standby ON/OFF' button on the remote control for 6 seconds to reset the filter indicator. A clockwise-rotating pattern shows on the LED display, then the machine returns to normal use.
  5. Alternatively, reset the filter life in the MyDyson app: Settings > Filter life > Reset.

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.

Related Dyson Air purifier Pure Hot+Cool HP01 problems

See all Dyson Pure Hot+Cool HP01 codes & guides →