Chevrolet Truck Silverado 1500 Vibration and clunking from driveshaft
What this problem usually means
On 2019-2020 Silverado 1500s a weld on the driveshaft may not have been made correctly at the factory, causing vibration or clunking from under the truck. If the driveshaft comes apart, the truck loses drive and may be damaged further. GM recalled the affected trucks.
Likely causes
- Incorrectly made factory weld on the driveshaft
- Driveshaft separation causing loss of drive
How to fix it — step by step
- Run the VIN through NHTSA's recall lookup and confirm the GM driveshaft recall remedy is complete
- Stop driving and have the truck towed if a new clunk or strong vibration starts underneath
- Have the rear driveshaft inspected on a lift → Shop the rear driveshaft at Amazon
- Recall replacement of the rear driveshaft is performed free by a dealer for affected trucks
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
This fault usually needs a technician - but this is the part they would test first.
Then the likely broken part is the rear driveshaft.
Parts that commonly fix it
- rear driveshaft - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Chevrolet manual is on Chevrolet's support site — you'll need your model number.
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.