Chevrolet SUV Tahoe Broken exhaust manifold bolts
What this problem usually means
Broken exhaust manifold bolts are a documented issue on the 5.3-liter and 6.2-liter V8 Tahoes, most often the rear two bolts on the driver's side manifold. A broken bolt lets the manifold leak with a tick on cold start that fades as the metal warms and expands, which is easily mistaken for a lifter tick.
Likely causes
- broken exhaust manifold bolts → Shop the exhaust manifold bolts at Amazon
- manifold gasket leak at the broken bolt
How to fix it — step by step
- Listen on a cold start for a tick that fades as the engine warms up
- Have a shop isolate the noise at the exhaust side of the engine rather than the valve covers
- Inspect the rear driver's side manifold bolts for breakage
- Have an experienced shop drill out and extract the broken bolts and fit new bolts, since a botched extraction can crack the head
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the exhaust manifold bolts.
Parts that commonly fix it
- exhaust manifold bolts - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Working on a specific model? The official Chevrolet manual is on Chevrolet's support site — you'll need your model number.
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.