Chevrolet Silverado 1500 Hard brake pedal
What this problem usually means
On 2014-2018 Silverados, a brake pedal that gets hard to push with longer stopping distances points to the engine-driven vacuum pump that powers the brake booster wearing out; about 770 NHTSA complaints describe it. GM covered it two ways: recalls (19V645000, and 20V603000 for some 2018 trucks) updating brake software to add hydraulic assist, and special coverage N182202780 paying for a new pump for 10 years/150,000 miles.
Likely causes
- Worn engine-driven vacuum pump reducing brake booster assist
- Vacuum pump drive belt failure
- Vacuum hose leak between the pump and booster
- Brake booster failure (less common than the pump on these trucks)
How to fix it — step by step
- Stop driving the truck if the pedal is hard and stopping distances have grown; reduced brake assist is a safety problem, not an annoyance
- Check your VIN at nhtsa.gov/recalls for the vacuum pump recalls and ask a dealer whether special coverage N182202780 still applies, since the pump replacement may be free
- Have the vacuum pump output and the pump belt inspected; a failed belt can mimic a failed pump
- Pump replacement and the recall software update are dealer/shop work on a safety system
Parts that commonly fix it
- vacuum pump - Shop at Amazon
- vacuum pump belt - Shop at Amazon
- brake booster vacuum hose - Shop at Amazon
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.