Cadillac SUV Escalade Engine failure / loss of propulsion

What this problem usually means

On 2021-2024 Escalades with the 6.2L V8 (RPO L87), the connecting rod and/or crankshaft components may have manufacturing defects that can lead to engine damage and engine failure. GM's recall bulletin for NHTSA campaign 25V-274 (GM N252494000) states that if the engine fails during operation the vehicle will lose propulsion. Warning signs can include knocking, a check engine light and sudden stalling before failure.

Likely causes

  1. Manufacturing defects in the connecting rods
  2. Manufacturing defects in the crankshaft

How to fix it — step by step

  1. Check the VIN for open recall 25V-274 before anything else
  2. Stop driving and have the vehicle towed if there is knocking, metal in the oil, or a sudden loss of power
  3. At the dealer, the engine is inspected under the recall; engines that fail inspection are repaired or replaced → Shop the engine at Amazon
  4. Engines that pass inspection receive the recall's higher-viscosity oil, a new oil fill cap identifying the new grade, an oil filter replacement and an owner's manual insert, free of charge → Shop the oil fill cap at Amazon → Shop the oil filter at Amazon

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Cadillac SUV Escalade problems

See all Cadillac Escalade codes & guides →