Cadillac Sedan CT5 Coolant flow valve failure (check engine light)

What this problem usually means

The CT5's 2.0L turbo (LSY) uses an electronically controlled coolant flow valve instead of a conventional thermostat. When the valve sticks or a sensor disagrees, the PCM sets codes P00B7, P0128 or P2681, sometimes under 50,000 miles, with loud fans, weak cabin heat, a swinging temperature gauge and sometimes reduced power. Left unaddressed it risks overheating. GM bulletin PIP5578 covers the condition.

Likely causes

  1. Sticking electronic coolant flow valve
  2. Coolant temperature sensor disagreement

How to fix it — step by step

  1. Scan for codes P00B7, P0128 or P2681
  2. Note fan behaviour, cabin heat and temperature gauge movement
  3. Test the coolant flow valve's operation against the commanded position → Shop the coolant flow valve at Amazon
  4. Replace the coolant flow valve if it sticks or fails the test

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Cadillac Sedan CT5 problems

See all Cadillac CT5 codes & guides →