Buick SUV Enclave Transmission won't shift into 3rd, 5th or reverse

What this problem usually means

2008-2009 Enclaves (and other first-generation years at lower rates) can lose 3rd, 5th and reverse gears when the 3-5-R wave plate inside the 6-speed automatic breaks apart. Engine Patrol's Enclave guide describes bucking or shuddering, hesitation and a check engine light, and notes GM extended the transmission warranty on 2007-2009 models to 10 years/120,000 miles for this failure.

Likely causes

  1. Broken 3-5-R clutch wave plate
  2. Debris from the broken plate damaging other transmission internals

How to fix it — step by step

  1. Note which gears are missing - loss of 3rd, 5th and reverse together is the classic wave plate pattern → Shop the 3-5-r wave plate at Amazon
  2. Have codes read; transmission codes may or may not be stored
  3. Do not keep driving it - circulating metal debris damages more of the transmission
  4. The transmission must be opened, cleaned out and rebuilt with an updated wave plate, or replaced with a remanufactured unit

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Buick SUV Enclave problems

See all Buick Enclave codes & guides →