Bosch Dishwasher E08 Error Code
What the E08 code means
On older Bosch models, water is not filling above the level of the heating element - the heat pump detects the water level in the cabinet is too low. This code is not on Bosch's current US list, so confirm against your model manual.
Likely causes
- filling problem - low water supply or inlet fault
- heating element / heat pump problem
- blocked filter restricting circulation
How to fix it — step by step
- Check the water supply tap is fully open and the inlet hose is not kinked
- Clean the dishwasher filter
- Reset power for 5 minutes and run a cycle; if the code returns, book a technician
Parts that commonly fix the E08 code
- water inlet valve - Shop at RepairClinic
- heating element - Shop at RepairClinic
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.