Blueair Air purifier Blue Signature SP3i Fabric pre-filter cleaning
What this problem usually means
Documented maintenance guide: clean the pre-filter regularly when you see dust or dirt on it.
Likely causes
- Dust or dirt visible on the fabric pre-filter
How to fix it — step by step
- Turn the air purifier off and unplug it, and remove the fabric pre-filter → Shop the fabric pre-filter at Amazon
- Vacuum the exterior of the fabric with a soft brush attachment for a light clean, or wash it according to the instructions on the fabric pre-filter's label for a deeper clean, then hang it to dry
- Pull the clean pre-filter back over the main filter, ensuring the logo tag of the pre-filter is on the upper part
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the fabric pre-filter.
Parts that commonly fix it
- fabric pre-filter - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number on the unit's rating plate. It's the key to the right manual pages and the right parts.