Audi SUV Q5 Steering Rack Failure

What this problem usually means

Q5s from around the mid-2010s can suffer steering failure and stiffness, per CarBuzz: the power steering pumps are prone to failure on both four-cylinder and V6 models, the electronic steering rack is a known Audi weak point, and owners also report stiffness when turning that the owner community attributes to the steering shaft U-joints, with greasing a temporary fix. A shaft or rack replacement has been reported at up to $4,000.

Likely causes

  1. Electric power steering rack failure
  2. Power steering pump failure on hydraulic-assist cars → Shop the power steering pump at Amazon
  3. Steering shaft U-joint stiffness and binding
  4. Steering angle or torque sensor fault producing similar warnings

How to fix it — step by step

  1. Note whether the fault is stiffness, notchiness, a warning light, or total assist loss; each points differently
  2. Try the documented temporary check: U-joint stiffness may ease with lubrication, rack failure will not
  3. Have steering fault codes read with a VAG-capable tool before replacing the rack → Shop the steering rack at Amazon
  4. Replace the rack or shaft as diagnosed; steering is a safety system, so do not live with intermittent assist loss → Shop the steering shaft at Amazon

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Audi SUV Q5 problems

See all Audi Q5 codes & guides →