Audi SUV Q5 (8R, 2009–2016) Carbon Buildup
What this problem usually means
RepairPal lists carbon buildup on the intake valves, intake and runner flaps (P0300-series codes) as the most commonly reported Q5 problem: the 2009-2016 Q5 uses the 2.0 TFSI or 3.2L FSI direct-injection engines, and these engines are subject to carbon buildup because fuel never washes the back of the intake valves. Symptoms build gradually — rough idle, misfires and reduced power.
Likely causes
- Carbon deposits on intake valves from direct injection
- Intake runner flap restriction
- PCV oil vapour baking onto the valves
- Short-trip use accelerating deposit formation
How to fix it — step by step
- Have the codes read; P0300-series multi-cylinder misfires with rough cold idle support carbon
- Rule out coils and spark plugs on the flagged cylinders first
- Confirm deposits by inspection before paying for cleaning
- Have the intake removed and the valves walnut-blasted if deposits are confirmed
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the intake manifold gasket set.
Parts that commonly fix it
- intake manifold gasket set - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.