Audi SUV Q5 (8R, 2009–2015) Excessive Oil Consumption

What this problem usually means

The first-generation Q5's 2.0-litre TFSI engine has notorious excessive oil consumption, per CarBuzz: owners deal with constant top-ups, part replacements or even whole-engine fixes, the issue is most prevalent on 2014 models, and it usually becomes apparent at around 60,000 miles. The documented fix is replacement of the pistons and piston rings, reported at around $9,000 — internal engine work, which is why a consumption test matters before buying one of these cars.

Likely causes

  1. Piston ring design allowing oil past into the combustion chambers
  2. Oil control rings coking up with mileage
  3. PCV system fault contributing to consumption
  4. Turbocharger seal leakage, which must be ruled out

How to fix it — step by step

  1. Measure the real rate: fill to the mark, record mileage, and check every 500 miles
  2. Rule out external leaks and a faulty PCV valve before blaming the rings → Shop the pcv valve at Amazon
  3. Check for blue exhaust smoke under load, which supports burning over leaking
  4. Do not authorize the pistons-and-rings repair without a documented consumption test; it is a major engine job → Shop the piston rings at Amazon → Shop the pistons at Amazon

Did that fix it?

Worked through the steps? Say where you landed - it pinpoints what to do next.

Parts that commonly fix it

What fixed yours?

Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.

Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.

Manual & model number

Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.

Related Audi SUV Q5 (8R, 2009–2015) problems

See all Audi Q5 (8R, 2009–2015) codes & guides →