Audi Sedan A4 (B7/B8, 2006–2012) High-Pressure Fuel Pump Failure
What this problem usually means
Hesitation upon acceleration due to a faulty high-pressure fuel pump has been a common issue on some 2006-2010 and 2012 A4s, per CarParts. The part usually fails due to contamination, overheating and worn-out gears, and symptoms can include sputtering, stalling, surging, poor fuel economy and, in some cases, an engine that will not start at all.
Likely causes
- High-pressure fuel pump internal wear
- Fuel contamination damaging the pump
- Pump overheating in service
- Cam follower wear driving the pump on engines so equipped
How to fix it — step by step
- Have fuel pressure tested against specification under load; hesitation alone does not prove the pump
- Rule out a clogged fuel filter and a weak in-tank pump before replacing the high-pressure pump → Shop the high-pressure fuel pump at Amazon → Shop the fuel filter at Amazon
- Check for fuel dilution in the engine oil, which can accompany a failing high-pressure pump
- Replace the high-pressure fuel pump (and inspect its follower where fitted) if pressure tests confirm it
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the high-pressure fuel pump.
Shop the high-pressure fuel pump at Amazon
Also tied to this fault: fuel filter - Shop at Amazon
Parts that commonly fix it
- high-pressure fuel pump - Shop at Amazon
- fuel filter - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.