Acura SUV RDX Vibration at idle from worn engine mounts
What this problem usually means
Driven Auto Care's RDX guide notes motor mounts on both RDX generations wear in stop-and-go use and produce vibration at idle that is felt through the cabin and steering wheel.
Likely causes
- Collapsed or torn engine mounts
- Transmission mount wear
How to fix it — step by step
- Confirm vibration is worst at idle in Drive and smooths out with rpm
- Inspect mounts for cracks, sagging or fluid leaks (active mounts)
- Have a shop power-brake test to confirm mount movement
- Replace the failed engine mount(s) → Shop the engine mount at Amazon
Did that fix it?
Worked through the steps? Say where you landed - it pinpoints what to do next.
Good - you're done. If it comes back, the causes at the top of this page are where to look first.
Then the likely broken part is the engine mount.
Parts that commonly fix it
- engine mount - Shop at Amazon
What fixed yours?
Fixed this on your machine? Tap what did it - reports from owners set the percentages on this page.
Source: manufacturer / repair documentation. Codes can vary by model — confirm against your manual.
Manual & model number
Find your model number in the owner's manual and on the driver-door jamb label. It's the key to the right manual pages and the right parts.